Smart Solar Network Switch
Key Features
Wide Temperature Working
Intelligent Working Capability
Breakthrough Working Capability
Safety Working Capability
Network Specifications
| Provider Mode Ports | |
| Fixed Port | 2*1000 Base-X, 4*10/100/1000Base-T (POE & POE+ Support) |
| Power interface | Redundant dual power supply (Solar & Battery) |
| LED Indicators | PWR, Link, ACT LED |
| Protection | IP40 rated protection, 8-15KV anti-static and 4KV surge protection |
| Dialing instructions | |
|---|---|
| 1. LFP | Remote PD restart |
| 2. LGY | LEGACY (Standard/Non-Standard POE) |
| 3. VLAN | Port Isolation |
| 4. RST | Reset |
| Network Topology | |
| Star topology, Bus topology & Tree topology | Support |
| Electrical Specifications | |
| Input voltage | DC12-58V (Non-Poe), DC48-58V (PoE) |
| Total Power consumption | <5W (Non-Poe), <125W (PoE) |
| PoE | |
| Poe port | 1~4 |
| PoE Protocol | 802.3af, 802.3at |
| Pin Assignment | 1,2,3,6 |
| Layer 2 Switching | |
| Switching capacity | 14G |
| Packet forwarding rate | 10.416Mpps |
| MAC address table | 8K |
| Buffer | 1M |
| MDX/MIDX, Flow control, Port Isolation, Remoter PD restart, and Reset | Support |
| Jumbo Frame | Support 10K bytes |
| Power | |
| Solar Panel Input capacity | Up to 550W with 12V DC Supply |
| Battery | Up to 150Ah Battery |
| DC Power | 48V DC & 12V DC Available |
| USB | 1 USB Ports |
| Protection | Surge protection up to 80KA (No external earthing required) |
| Protection on POE Ports (4 Ports) | 4KV Surge protection on each POE Ports |
| Mechanical | |
| Outer Box | IP 66 Box for outdoor Application |
| Mounting options/Installation Method | Pole Mounted, Wall Mounted and Table mounted (Mounting accessories including) |
| Lock | Physical Lock and mechanical lock options |
| Product size (Dimension) | |
| Weight (Except battery) | |
| Environment | |
| Operating temperature and Storage temperature | -30°C~+60°C |
| Relative humidity | 5%~95% non-condensing |
| MTBF | 100,000 hours |
| Protection parameter (without external/Ground earthing) | |
| Maximum surge handling capacity | 120 kA (8/20 micro seconds) |
| Short circuit withstand current | 10kA |
| Residual current | 0.001 amps |
| Spark over voltage (8/20µS) | 1.5kV |
| Impulse Response Time | <25 Nano Second |
| Max. Leakage Current at 75% V1mA, IL (µA) | 20 µA |
| Protection on POE Ports (4 Ports) | 4KV Surge protection on each POE Ports |
| 100W Solar Panel Specifications | |
| Types of Module, Maximum Power | 100W |
| Tolerance | ± 3% |
| Open Circuit Voltage | 22V |
| Short Circuit Current | 606A |
| Maximum Power Voltage | 18V |
| Maximum Power Current | 5.56A |
| Module Efficiency | 14.9% |
| Solar Cell Efficiency | 17.02% |
| Series Fuse Rating | 15A |
| Terminal Box | IP65 |
| Maximum system voltage | 1000V DC |
| Operating Temperature | -40°C~85°C |
Solar Power Network Switch Connectivity
FAQ About Smart Solar Network Switch
Can we use this switch for PTZ camera, IP camera and Analogue HD Camera ?
➤ Yes, it is having 4 POE port for IP Camera and POE PTZ camera. IT is also having 12V DC power output for HD Camera power supply.
Can we use this switch for NVR, DVR and 4G Wifi Router?
➤ Yes, it is having 12V DC power supply option for DVR & NVR and also having space to keep 4 channel small DVR & NVR inside the box. You can connect 4G router on 12V DC power supply or USB and you can keep router in the box.
How much fiber length can be connected in this switch?
➤ It is having 2 Fiber port. Both are support up to 100KM single mode fiber module and support up to 550 Meter for multi-mode fiber module.
How much battery support on this device?
➤ It can support up to 180AH battery on standard model.
How much solar panel can support on this device?
➤ 330W solar panel with 12V can be connected on this standard model.
Can you customize this device accordingly our need?
➤ Yes, we can do it as per your requirement for number of POE Ports, battery backup time, Installation mechanism, extreme temperature, number of fiber ports or box size. We can do it.
Is this device need earthing connection?
➤ No, this device does not required external earthing connection because it is having inbuilt digital earthing protection.
Can we connect AC power equipment on this device, like any adaptor or TV?
➤ Yes, you can connect it in premium model with 300W Ac power port options.
Smart Solar FCBC
Key Features
Smart Solar FCBC Technical Specification
| Parameter | ||
|---|---|---|
| Model | 2KVA | 5KVA |
| Capacity | 80Ah~220Ah TUBULAR/FLAT/SMF | |
| Number of Battery | 24V | 48V |
| Battery Boost Voltage | 28.08V~29.4V±0.5V | |
| Battery Charging Current from Solar | 30Amp | |
| Solar Panel | PV PANEL OF 2000W | PV PANEL OF 3500W |
| Solar Input Voltage | 55V~107V | 130V~220V |
| Maximum charge current (Grid) | 20Amp Max. | |
| Electricity input voltage range | 110~280V±10V | |
| Power input frequency | 47 Hz~53 Hz | |
| Output voltage range | 220VAC ±5% | |
| Output frequency | 47 Hz~53 Hz | |
| Overload | >100% | |
| Transfer Time (typical s.s.) | <20 ms | |
| 48V DC output - Maximum Current | 12.5Amp | |
| Wave & Noise | 240mVp-p | |
| Inlet wire stability | ±0.5% | |
| Load stability | ±0.5% | |
| Efficiency | 88% | |
| Adjustable range for DC Voltage | ±10% | |
| 24V DC output - Maximum Current | 14.6Amp | |
| Wave & Noise | 150mVp-p | |
| Inlet wire stability | ±0.5% | |
| Load stability | ±0.5% | |
| Efficiency | 88% | |
| Adjustable range for DC Voltage | ±10% | |
| 12V DC output - Maximum Current | 17Amp | |
| Wave & Noise | 150mVp-p | |
| Inlet wire stability | ±0.5% | |
| Load stability | ±0.5% | |
| Efficiency | 85.5% | |
| Adjustable range for DC Voltage | ±10% | |
| USB Output - Maximum Current | 3.1Amp | |
| Protection parameter (without external/Ground earthing) | ||
| Maximum surge handling capacity | 120 kA (8/20μs) | |
| Short circuit withstand current | 100kA | |
| Residual current | 0.001 amps | |
| Spark over voltage (8/20μs) | 1.5kV | |
| Impulse Response Time | <25 Nano Second | |
| Max. Leakage Current at 75% Vr | 20μA | |
| Protection on POE Ports (4 Ports) | 4KV Surge protection on each POE Port | |
Smart Solar FCBC Application Diagram
FAQ About Smart Solar FCBC
Can we connect all the power option on this device simultaneously?
➤ Yes, you can connect 12V DC products like router and modems, 24V DC products like Radio and walky-talky, 48V DC products like Exchange and MER, 230V AC power products like all kind of Network switches Computer and USB charging products.
Can we use this device with solar only?
➤ Yes, you can use this device with solar panel for power and battery charging.
Can we use this device with electricity / Generator only?
➤ Yes, you can use this device with electricity or generator for power and battery charging.
Can we use this device with solar and electricity both?
➤ Yes, you can use. If solar power not available then it will automatically change over to electricity.
Can this device give uninterrupted power supply to all the equipment's?
➤ Yes, it will give pure sine wave power to all the equipment’s.
Can we put this device in 19 inch rack?
➤ Yes, it is having 19 inch rack mounting option.
Can you customize this device accordingly our need?
➤ Yes, we can do it as per your requirement with number of battery support, number of power output option and number of output amp & voltage options.
About Us
Rasnal Telecom Started with 2 employees, today Rasnal is a team of 50 employees who are technical expertise and hold in-depth knowledge of products and offer 24×7 technical support to the customers. Rasnal, with its strong belief in providing ultimate customer satisfaction, manages to gain the trust of its customers and enjoys a reputation nationwide. Even after basking in the glory of success, Rasnal continues to improve its operations, infrastructure and train its team from time to time to continue providing the best possible customer experience in the sector of telecom and security.
Rasnal is one stop solution for Telecom products, Security products, Networking products, Surge protection products and Digital Grounding products.
Disclaimer
Rasnal products are designed to meet diverse applications and deployments. Customer owns responsibility to ensure their application and deployment do not violate local laws. Customer acknowledges understanding all configuration and significance thereof. Customer owns responsibility for protecting their equipment, networks and data from hacking and misuse.
